Download the Budget
Line Card Here!
Forklift Forks Listing
Ask about very large sizes not shown
Forklift fork part numbers = Thickness X Width X Length X Class
Thickness |
Class |
| 125 = 1 1/4 | 2 = II (16" hook mount) |
| 150 = 1 1/2 | 3 = III (20" hook mount) |
| 175 = 1 3/4 | 4 = IV (25" hook mount) |
| 250 = 2 1/2 | |
| FTP indicates fork is fully tapered and top polished | |
STD Taper or Pallet fork: The most popular of all tapers used in picking up skids or pallets. Normally, tapers begin 16" to 24" from tip - with a 3/8" tip. |
|
Full Taper: Taper begins at heel of fork and extends to tip, ending with 3/8" tip. Can be polished or not. Good for getting under plywood or cardboard boxes. |
|
Full Taper Polish and Chisel Point: Same as Full Taper but has 1/8" tip. |
|
Forks are sold in pairs except where specifically noted by an "EA" for each. We are confident that you will find that our High Strength, Forged forks are the strongest, safest and best priced of any lift truck fork on the market today. |
|
The following table may take up to 30 seconds to load on older modems.
|
Please Note: All forklift forks are sold in PAIRS unless noted! |
||||||
| Part Number | Thickness | Width | Length | Class | Taper | Shipping Wt/Pr |
| 1-3-36-B30 | 1" | 3" | 36" | 30" BH | STD | 105 |
| 125-4-36-2 | 1.25" | 4" | II | 152 | ||
| 125-4-42-2 | 42" | 168 | ||||
| 125-4-48-2 | 48" | 186 | ||||
| 125-4-48-B | B | 186 | ||||
| 150-3-42-B48 | 1.5" | 3" | 42" | 48" BH | 206 | |
| 150-4-36-2 | 4" | 36" | II | 172 | ||
| 150-4-42-2 | 42" | 194 | ||||
| 150-4-42-2FTP | FTP | 176 | ||||
| 150-4-42-B48 | 48" BH | STD | 260 | |||
| 150-4-48-2 | 48" | II | 214 | |||
| 150-4-48-2FTP | FTP | 192 | ||||
| 150-4-48-B | 22" BH | STD | 214 | |||
| 150-4-48-B48 | 48" BH | 323 | ||||
| 150-4-54-2 | 54" | II | 222 | |||
| 150-5-42-2 | 5" | 42" | 240 | |||
| 150-5-42-2FTP | FTP | 216 | ||||
| 150-5-48-2 | 48" | STD | 266 | |||
| 150-5-48-2FTP | FTP | 230 | ||||
| 150-5-54-2 | 54" | STD | 292 | |||
| 150-5-60-2 | 60" | 318 | ||||
| 150-5-72-2 | 72" | 370 | ||||
| 150-6-42-3FTP | 6" | 42" | III | FTP | 282 | |
| 150-6-48-3FTP | 48" | 302 | ||||
| 150-7-42-3FTP | 7" | 42" | 326 | |||
| 150-7-48-2FTP | 48" | II | 326 | |||
| 150-7-48-3FTP | III | 350 | ||||
| 150-8-48-3FTP | 8" | 396 | ||||
| 175-4-36-2 | 1.75" | 4" | 36" | II | STD | 192 |
| 175-4-42-2 | 42" | 216 | ||||
| 175-4-42-2FTP | FTP | 202 | ||||
| 175-4-48-2 | 48" | STD | 240 | |||
| 175-4-48-2FTP | FTP | 216 | ||||
| 175-4-48-B48 | 48" BH | STD | 339 | |||
| 175-4-48-B55 | 55" BH | 367 | ||||
| 175-4-48-3 | II | 285 | ||||
| 175-4-54-2 | 54" | II | 264 | |||
| 175-4-54-2FTP | FTP | 230 | ||||
| 175-4-60-2 | 60" | STD | 288 | |||
| 175-4-72-2 | 72" | 336 | ||||
| 175-5-36-2 | 5" | 36" | 240 | |||
| 175-5-42-2 | 42" | 270 | ||||
| 175-5-42-2FTP | FTP | 248 | ||||
| 175-5-42-3 | III | STD | 302 | |||
| 175-5-48-2 | 48" | II | 300 | |||
| 175-5-48-2FTP | FTP | 266 | ||||
| 175-5-48-3 | III | STD | 325 | |||
| 175-5-48-3FTP | FTP | 290 | ||||
| 175-5-54-2 | 54" | II | STD | 330 | ||
| 175-5-54-2FTP | FTP | 280 | ||||
| 175-5-54-3FTP | III | 312 | ||||
| 175-5-60-2 | 60" | II | STD | 360 | ||
| 175-5-60-2FTP | FTP | 298 | ||||
| 175-5-60-3 | III | STD | 394 | |||
| 175-5-60-3FTP | FTP | 332 | ||||
| 175-5-72-2 | 72" | II | STD | 420 | ||
| 175-5-72-3 | III | 440 | ||||
| 175-7-48-3FTP | 7" | 48" | FTP | 402 | ||
| 175-7-54-3FTP | 54" | 424 | ||||
| 175-7-60-3FTP | 60" | 448 | ||||
| 2-150-42-2 | 2" | 1.5" | 42" | II | 10" | 57 / EA |
| 2-150-42-3 | III | 63 / EA | ||||
| 2-150-48-2 | 48" | II | 62 / EA | |||
| 2-150-48-3 | III | 69 / EA | ||||
| 2-150-48-B33 | 33" BH | 62 / EA | ||||
| 2-2-42-2 | 2" | 42" | II | 75 / EA | ||
| 2-2-42-3 | III | 82 / EA | ||||
| 2-2-48-2 | 48" | II | 81 / EA | |||
| 2-2-48-3 | III | 88 / EA | ||||
| 2-2-48-4 | IV | 96 / EA | ||||
| 2-2-48-B33 | 33" BH | 92 / EA | ||||
| 2-4-48-2 | 4" | II | STD | 262 | ||
| 2-4-48-B | 30" BH | 272 | ||||
| 2-4-48-B66 | 66" BH | 440 | ||||
| 2-4-60-B | 60" | 30" BH | 325 | |||
| 2-4-60-B66 | 66" BH | 489 | ||||
| 2-4-96-2 | 96" | II | 478 | |||
| 2-4-96-B | 26" BH | 516 | ||||
| 2-5-42-3 | 5" | 42" | III | 332 | ||
| 2-5-48-3 | 48" | 366 | ||||
| 2-5-48-3FTP | FTP | 330 | ||||
| 2-5-48-B74 | 74" BH | STD | 616 | |||
| 2-5-54-3 | 54" | III | 400 | |||
| 2-5-60-3 | 60" | 434 | ||||
| 2-5-72-3 | 72" | 502 | ||||
| 2-5-72-B74 | 74" BH | 752 | ||||
| 2-5-84-B | 84" | 26" BH | 546 | |||
| 2-5-96-3 | 96" | III | 622 | |||
| 2-5-96-B | 26" BH | 612 | ||||
| 2-6-42-3 | 6" | 42" | III | 394 | ||
| 2-6-48-3 | 6" | 48" | 436 | |||
| 2-6-48-3FTP | FTP | 388 | ||||
| 2-6-54-3 | 54" | STD | 478 | |||
| 2-6-60-3 | 60" | 520 | ||||
| 2-6-72-3 | 72" | 602 | ||||
| 2-6-84-B | 84" | 26" BH | 646 | |||
| 2-6-96-B | 96" | 26" BH | 726 | |||
| 250-6-48-3 | 2.5" | 48" | III | 540 | ||
| 250-6-48-4 | IV | 600 | ||||
| 250-6-48-B | 40" BH | 618 | ||||
| 250-6-60-4 | 60" | IV | 702 | |||
| 250-6-60-B | 40" BH | 720 | ||||
| 250-6-60-B74 | 74" BH | 720 | ||||
| 250-6-72-4 | 72" | IV | 1093 | |||
| 250-6-72-B | 40" BH | 822 | ||||
| 250-6-84-B | 84" | 958 | ||||
| 250-6-96-B | 96" | 990 | ||||
| 250-8-60-B | 8" | 60" | 959 | |||
| 250-8-72-B | 72" | 1095 | ||||
| 250-8-72-B85 | 85" BH | 1605 | ||||
| 250-8-96-B | 96" | 40" BH | 1422 | |||
| 3-8-96-B | 3" | 1616 | ||||
1-800-821-3796
International Orders
Para Ordenar
1-877-702-6076
Budget Attachments and Parts
1600 Oakland Ave, Kansas City, MO 64126
Phone: 816-231-7988 - Fax: 816-241-4672
Our business hours are Monday through Friday - 8:00 AM to 5:00 PM CST.
Want to purchase or get more information on a forklift part, engine or attachment
but can't get us on the phone?
Click here and a sales
person will get back with you as soon as possible.
Customer Service | Meet Our Sales Team
BUDGET makes buying a snap. You may pay for your purchases with your Visa, MasterCard or American Express. We also accept Check-By-Phone (ACH) payments. Corporate buyers may apply for an open account. It takes just a couple of minutes to complete our online credit application.
BUDGET Attachments and Parts has been a trusted source for quality attachments, parts, and remanufactured components for forklifts, skid steers, loaders, telehandlers, and tractors/backhoes for over 25 years. We believe in selling quality attachments and parts at affordable prices.
BUDGET has a full line of attachments including ITA & Pin-On forks, carpet rams and trailer spotters; pallet fork and frame assemblies, buckets, grapples, truss booms, extension booms and jib booms for all makes of backhoes, wheel loaders, skid steers, telehandlers, rough terrain and high reach forklifts; bucket forks for backhoes and loaders; work platforms for forklifts and telehandlers; and our newest attachment: the hydraulic tree shear, which fits on skid steers, telehandlers and excavators. Each of our frame assemblies features the world famous Budget fully forged forklift forks. The combination is unbeatable.
BUDGET also sells accessories such as seats, tires, and ground protection mats. Call 1-800-821-3796 and let us put our expertise to work for you.
Looking for alternative commercial financing?
